News tagged measurement
  • Gender pay gap: why infrastructure industry must move from measurement to action

    The infrastructure sector has never faced a greater demand for talent. Across energy, water, transport and digital infrastructure, businesses are being asked to deliver some of the most ambitious projects in a generation. The post Gender pay gap: why infrastructure industry must move from measurement to action appeared first on New Civil Engineer.

  • Don't Let Manual Takeoff Short-Circuit Your Bids - Auto Takeoff for Electrical Contractors

    In short Electrical takeoff requires identifying symbols, devices, circuits, equipment, wiring, and specialty systems across plans and schedules. Details on one page, takeoff on another, endless flipping between project pages just to get started! Add to the takeoff complexity, the estimator must account for all the materials and labor required to complete a build out. Takeoff BOOST™’s Expanded Auto Takeoff coverage, along with the included Estimating functionality in ConstructConnect Takeoff, helps electrical estimators go from reviewing plans to submitting a bid in record time. Auto Takeoff gives estimators a faster, more organized way to establish the initial measurement set for review. This feature is current in beta testing and will be available for all ConstructConnect Takeoff users soon. Why this matters Electrical plans combine symbols, tags, homeruns, schedules, panel information, notes, and details. Estimators are stuck starting from a blank page which means they spend a disproportionate amount of time clicking and flipping between pages. A large part of your time is spent tracing and counting before the scope is organized enough to review, let alone begin the actual estimate. Takeoff BOOST™ Auto Takeoff helps bring common electrical categories into one structured starting point: Lighting fixtures Power devices Lighting controls Distribution and equipment Branch circuits and homeruns Feeders and service entrance Conduit, wire, and accessories Grounding and bonding Fire alarm Low-voltage and communications A faster path to the first review Load your plans set (Takeoff BOOST names and scales your pages automatically), open an electrical plan, verify the page scale, then launch Auto Takeoff and choose Electrical. You tell Auto Takeoff the scope you want and it feeds your options into Takeoff Assist, which immediately goes to work reviewing this plan and related pages for electrical work and related details. The resulting conditions and marked-up plan provide a categorized starting point for reconciling devices, equipment, circuits, and specialty systems. Takeoff Assist explains what it’s doing the entire time and then gives you a recap of which pages it took off, what it found, and if there are any anomalies you need to research. All this in minutes rather than hours or days of manually poring over project documents and drawing takeoff one click at a time! The payoff for electrical estimators It’s not as if these electrical plans became self-explanatory. The benefit to using Auto Takeoff and Takeoff Assist is that you can spend less time establishing repetitive counts and linework before the real estimating work begins. Takeoff Assists organized first pass makes it easier to see what has been measured, what needs a second look, and what may need to be added manually. Auto Takeoff creates Conditions and takeoff and let's you know what it and why in the Takeoff Assist panel. Takeoff Assist isn’t just drawing measurements on a page, it’s understanding how the plans work together and the relationships between different takeoff objects. It shows you its insights and why it drew takeoff the way it did and calls out inconsistencies and things you may want to pay extra attention to. Auto Takeoff and Takeoff Assist don't replace you as the estimator - your expertise are critical, but put them to work where they matter: fine tuning your estimate and polishing your proposals. Keep the estimator in control Automation is amazing but electrical estimating still depends on the full set of project information. Fixture and device types may tie to schedules. Branch circuits, feeders, and service entrance work may require panel schedules and risers. Conduit, wire, grounding, fire alarm, and low-voltage scope may depend on notes, details, and specifications. As the expert, you still need to review the generated results against the complete drawing set, then adjust or add measurements as needed. Use natural language to communicate with Takeoff Assist and get your bid out faster than ever. ImportantTakeoff BOOST's Auto Takeoff is an AI-assisted starting point. Always verify scale, scope, conditions, quantities, and specifications before using results in an estimate. Ready to move from elevation plans to a reviewable takeoff faster? Book a demo of ConstructConnect Takeoff and Takeoff BOOST. Keep an eye out for the next article in this series: Auto Takeoff for Painting

  • Construction Fleet Management: Using Data to Reduce Vehicle Downtime

    Every contractor knows what unplanned downtime costs. Almost none can say which trucks are most likely to be out of service next month, or why the same two always are. That gap is not a data problem. It is a measurement problem, and it has a fairly short list of causes. Calendar maintenance is the […] <p>The post Construction Fleet Management: Using Data to Reduce Vehicle Downtime first appeared on CCR-Mag.com.</p>

  • Stop Missing Measurements in Complex Landscape Plans - Advanced Auto Takeoff for Concrete (Clone)

    In short Landscape plans pack multiple takeoff challenges into one set of drawings: from plant counts and area calculations to linear edges, irrigation elements, and site furnishings. Takeoff BOOST™’s Expanded Auto Takeoff coverage helps organize these measurement types into one structured review, so you spend less time hunting for measurements and more time estimating the full scope with confidence. Auto Takeoff gives estimators a faster, more organized way to establish the initial measurement set for review. This feature is current in beta testing and will be available for all ConstructConnect Takeoff users soon. Why this matters Takeoff BOOST™ Auto Takeoff helps bring common landscape categories into one reviewable first pass: Trees Shrubs Groundcover and perennials Sod, seed, and turf Planting beds Mulch and decorative aggregate Topsoil and planting soil Landscape edging Irrigation Site furnishings A faster path to the first review Load the landscape plans, verify the scale, select the scope you want to find, and run Auto Takeoff. Takeoff Assist takes over from there, analyzing your plans, details, and specs to determine what needs to be taken off. Takeoff Assist creates conditions and takeoffs on the current plan or on all plans that it determines have Landscaping objects - your choice. As it's working, Takeoff Assist keeps you informed of what it is doing. The payoff for estimators Landscape plans rarely use one measurement convention. Trees and shrubs may be symbols. Beds, mulch, and soil may be hatches or areas. Edging and irrigation may be linears or counts. Site furnishings may be identified by symbols and schedules. Auto Takeoff helps bring those categories together before you price in minutes. The benefit is that you, the estimator, get to reviewable takeoff results in minutes, not hours or days. Auto Takeoff creates Conditions and takeoff and let's you know what it and why in the Takeoff Assist panel. Auto Takeoff and Takeoff Assist let you waste less of your valuable time on poring over plans sets and manually clicking on takeoffs. You can devote more time to accurately pricing your bid, fine-tuning your proposals, and strengthening relationships to make your business more efficient and more profitable. If you aren't satisfied with the results, use natural language to tell Takeoff Assist what else you need. Let's say we wanted to account for the removal of trees or other objects, we just tell Takeoff Assist "Include demo/removal" and it understands what we want and adds those Conditions and takeoff. Keep the estimator in control A symbol may represent several sizes or species. A planting bed may contain multiple materials. Irrigation zones may continue across sheets. Soil may have different depth or preparation requirements. Compare the generated results with plant schedules, planting details, irrigation notes, soil requirements, and site-furnishing schedules, then adjust or add measurements as needed. ImportantTakeoff BOOST's Auto Takeoff is an AI-assisted starting point. Always verify scale, scope, conditions, quantities, and specifications before using results in an estimate. Ready to move from elevation plans to a reviewable takeoff faster? Book a demo of ConstructConnect Takeoff and Takeoff BOOST. Keep an eye out for the next article in this series: Auto Takeoff for Drywall  

  • Cambridge Uni and Laing O’Rourke launch universal productivity measurement framework

    The University of Cambridge Laing O’Rourke Centre has developed a framework for productivity measurement, designed to help businesses unlock the value of their existing data and use it systematically to understand how projects are delivered and where productivity can be improved. The post Cambridge Uni and Laing O’Rourke launch universal productivity measurement framework appeared first on Construction Management.

Resources tagged measurement

Get full access to our construction knowledge base, latest news and updates ... Join the discussion.

Create your FREE Account

By signing up, you agree to Construo's Terms of Use, Privacy Policy and Cookie Policy

OR

Already on Construo? Let us take you to